Guide

Agency utilization rate: how to calculate it and what is healthy

The formula for utilization rate, a worked example for a small agency, the range most agencies aim for, and three mistakes that make the number misleading.

· 3 min read · By the Mono team at ByteCraft

An agency sells its team's time. Utilization rate tells you how much of that time is actually going to client work, and it is the first number to look at when the team is busy but the profit is thin.

It is simple to calculate once you track time. This guide gives the formula, an example, a sensible target, and the mistakes to avoid.

The formula

Utilization rate is billable hours divided by available hours, as a percentage, for one person or for the whole team over a period.

  • Billable hours: time spent on client work that the client pays for.
  • Available hours: the hours the person was at work in the period. Leave out holidays, sick days and public holidays.

A worked example

A designer works 40 hours a week. In a four-week month with one day of leave, she has 152 available hours. Her timesheet shows 110 hours on client work. Her utilization rate is 110 divided by 152, which is 72%.

For the team, add everyone up. If five people had 760 available hours between them and logged 500 billable hours, the team rate is 66%. The team figure hides differences, so look at each person as well: one person at 95% and another at 40% average out to a number that looks fine.

What a healthy rate looks like

There is no single right number, because it depends on the role. People who mostly deliver work, such as designers and developers, are commonly expected to sit somewhere around 70% to 85%. Account managers and team leads are lower, because much of their job is not billable. Owners are lower still.

A rate close to 100% is not a goal. It means no time for training, internal work, sales or a quiet week, and it usually ends in overtime and people leaving. A rate well under 60% for a delivery role means you have more people than paid work, or that paid work is not being recorded.

Three mistakes that skew the number

  • Counting all client time as billable. Time on a client that you cannot charge for, such as rework or work outside the scope, should be tracked but not counted as billable. Otherwise the rate looks good while the margin falls.
  • Using contracted hours without removing leave. A person on holiday for a week did not have a bad month. Take leave out of the available hours.
  • Looking at it once a quarter. Utilization moves week by week. A monthly check is the minimum; a weekly one catches an idle week while you can still fill it.

Utilization is not profitability

A fully used team can still lose money if the work is underpriced or a client takes far more hours than they pay for. Utilization tells you whether people are busy with paid work. Client profitability tells you whether that work earns enough. You need both.

Doing this in Mono

Mono does not have a utilization report, but it holds the number you need for the top of the formula. The Timesheet shows the hours each person logged, filtered by team member and browsed by week, month or year, and it exports to a spreadsheet (CSV). Time entries carry a billable flag; the toggle is shown to people who can see invoices, which is part of the Pro plan.

Divide those hours by each person's available hours and you have the rate. For the other half of the picture, the Client ROI report on the Pro plan shows what each client paid minus expenses and the cost of your team's time.

Get started today

Run client work from one workspace.

Contracts, boards, time and invoices on the same records. The trial is free and needs no credit card.

No credit card required
Cancel anytime
90-day free trial